Maximum current at Bulk Charge 12A
Model SR1212:
Designed for charging 12V Batteries from 12V Panels (maximum Voc=25V)
Extreamly small foot print for size and power. 55cm3 (internal size) regulating panels up to 250W in peak power.
Weatherproof/Waterproof via Polymer Encapsulation. Giving the unit a greater freedom in mounting locations.
Now available in one model only.
SR1212-1:
• 3 Wire installation- No Mess, No Fuss.
• For Charging Flooded Cell Lead Acid batteries only.
*Discontinued* SR1212-2:
The SR1212-2 variant has reached its End of Life. Information for archival purposes. No further orders can be made for this variant.
• Full Featured
• Low Voltage Disconnect (LVD) via a secondary internal mosfet switch. Disconnecting at <11V and reconnecting when a new charge cycle starts at above >12.5V.
• Multiple battery chemistry support. Flooded Lead Acid, AGM/GEL and Lithium modes.
• Charge LED indication.
SR1212 Installation Sheet
|
Specifications |
SR1212-1 |
*Discontinued* SR1212-2 |
|
Maximum Current at Bulk Charge |
12A |
12A |
|
Maximum Input Panel Power |
250W |
250W |
|
Input Voltage |
15V to 25V |
15V to 25V |
|
Battery Voltage |
12V |
12V |
|
Typical Efficiency |
98% |
98% |
|
Monitoring & Control |
- |
Yes (Basic) |
|
LVD |
- |
Yes |
|
PV Short and Surge Protection |
- |
Yes |
|
Thermal Protection |
Yes |
Yes |
|
Dimensions [LxWxH] |
81 x 37 x 22mm |
81 x 37 x 22 mm |
Weight [g] | 50g | 70g |
Design and specifications may change without notice.