End of Life Product- Information below for archival purposes only. No new orders will be taken for these products.
Maximum Output 30A / 1800 Watts
• Input panel voltage up to 180 Voc input
• Ideal for charging batteries from higher
voltage panels
• Autoselect for 12V, 24V and 48V panels and batteries
• For Vented and Sealed Lead Acid Batteries as well as Calcium based chemistries
• Built in load switch configurable as a variable dawn to dusk or low
voltage disconnect
• Remote load control option and alarm
• Low voltage discontent
• Surge, PV short and reverse current protection
• Connectivity to the MCM product for Remote Monitoring and Control
Installation Manual for MPPT30HV
|
Specifications |
MPPT30HV |
|
Maximum Output Current |
30A |
|
Maximum Input Panel Power |
1800W with 48V batteries 900W with 24V batteries 500W with 12V batteries |
|
Input Voltage |
15V to 180V |
|
Battery Voltage |
12V / 24V / 48V or programmable 2v - 70v via MCM and GUI (programmable from 2V-70V or Vmp if Vmp<70V) |
|
Typical Efficiency |
97% |
|
Monitoring & Control |
Yes ( full via MCM) |
|
Dawn to Dusk, LVD or Remote Control |
Yes, programmable and enabled via MCM |
|
PV Short and Surge Protection |
Yes |
|
Thermal Protection |
Yes |
|
Dimensions [LxWxH] |
260 x 145 x 67 mm |
Design and specifications may change without notice.