Our new line of Battery Isolators are second to none with their new microprocessor controlled circuitry. Designed for stability, reliability and long life expectancy, this range of isolators should never let you down.
Solenoid Battery Isolator - KBI Series
Features Include:
• Introducing GSL Electronics' new Battery Isolator, The
KBI series… it has the coolest operating temperature
when nergised, and lowest standby current draw, we
have ever produced!
• Available in 12 and 24VDC versions at 100amp.
• Optional LED for operating indication, and fault indication
• Aux. battery will disconnect at low voltage even in override mode.
Protection from loss of main battery
• 2 second delay for operation
• High voltage disconnection, if regulator fails, trips isolator to protect Aux Battery.
• No damage from short surges up to 50v.
For More Information:
Feel free to contact us.
Installation Sheet for KBI100-12
Installation Sheet for KBI100-24
|
Product |
KBI Series |
|
Connect Voltage |
13.2V / 26.4V |
|
Disconnect Voltage |
12.7V / 25.4V |
|
100 Amps - Continuous Rating |
|
|
LED and Override Wire to Positive. |
|
|
No Voltage/ Load Required on Aux. Battery |
|
|
Solenoid Protection |
Design and specifications may change without notice.
EBI-100M Micro Controlled Electronic 100 Amp Battery Isolator
Features Include:
• Microprocessor control - improved reliability,
stability and life expectancy
• Effective current limiting to protect vehicle
electrical system from overload
• Galvanic insulation between positive main and auxiliary terminals
• No damage with short surges up to 60V or main connections inverted when enabled
• No delay to connect once enabled or to disconnect if disabled
• Voltage dip protection via 2 second delay
• Accuracy better than 0.5% or 50mV
• Custom cut off and cut in voltage available *
(* Conditions Apply, call sales )
Installation Sheet
|
Product |
EBI-100M |
|
Input Voltage |
12V Neg.Earth |
|
Charging
System |
100 Amps |
|
Cut In Voltage |
13.3 VDC |
|
Cut Out Voltage |
11.8 VDC |
|
Reversing Polarity Protection |
Yes |
|
Overload Protection |
Yes |
|
Thermal Protection |
Yes |
|
Overvoltage Protection |
Yes |
|
2 Fly Lead - Voltage Sensing |
Yes |
|
1/4 Brass Studs - Pos. Bat. |
Yes |
|
Weight |
400g |
|
Dimensions [LxWxH] |
90mm x 135mm x 60mm |
Design and specifications may change without notice.
*Discontinued* EBI-150M and EBI -100M-24 Micro Controlled Electronic 100/150 Amp Battery Isolators
Features Include:
• Microprocessor control - improved reliability,
stability and life expectancy
• Effective current limiting to protect vehicle
electrical system from overload
• Galvanic insulation between positive main and auxiliary terminals
• No damage with short surges up to 60V or main connections inverted when enabled
• No delay to connect once enabled or to disconnect if disabled
• Voltage dip protection via 2 second delay
• Accuracy better than 0.5% or 50mV
• Custom cut off and cut in voltage available *
(* Conditions Apply, call sales )
Installation Sheet
|
Product |
*Discontinued* EBI-150M |
*Discontinued* EBI-100M-24 |
|
Input Voltage |
12V Neg.Earth |
24V Neg.Earth |
|
Charging
System |
150 Amps |
100 Amps |
|
Cut In Voltage |
13.3 VDC |
26.6 VDC |
|
Cut Out Voltage |
11.8 VDC |
23.6 VDC |
|
Reversing Polarity Protection |
Yes |
Yes |
|
Overload Protection |
Yes |
Yes |
|
Thermal Protection |
Yes |
Yes |
|
Overvoltage Protection |
Yes |
Yes |
|
2 Fly Lead - Voltage Sensing |
Yes |
Yes |
|
1/4 Brass Studs - Pos. Bat. |
Yes |
Yes |
|
Weight |
400g |
400g |
|
Dimensions [LxWxH] |
90mm x 135mm x 60mm |
90mm x 135mm x 60mm |
Design and specifications may change without notice.
*Discontinued* Battery Isolator Installation Kit
Features Include:
• Isolator installation kit used in conjunction with
BATTERY ISOLATOR product
• Simple and Easy Installation
For More Information:
• Feel free to contact us
|
Product Includes: |
|
|
2x Battery Connection Cables |
2x Battery Lugs |
|
1x Earth Strap |
2x Battery Terminals |
Design and specifications may change without notice.